Ford Transit Cutaway 350 HD in Winchester

The 138-inch wheelbase gives the 2027 Transit Cutaway 350 HD XL a unique advantage in urban environments and confined job sites. Businesses that frequently navigate crowded streets, loading docks, parking structures, and tight service areas benefit from the vehicle's responsive handling and maneuverability.

Ford equips the 2027 Ford Transit Cutaway 350 HD platform with advanced safety technologies that help protect drivers, passengers, and cargo. Available driver-assistance systems can provide added confidence during daily operations by helping drivers monitor surrounding traffic, maintain awareness, and navigate challenging road conditions.

Built to handle substantial payload demands, the 2027 Ford Transit Cutaway 350 HD features an impressive 11,000-pound GVWR. This heavy-duty rating allows businesses to maximize cargo capacity while supporting a wide variety of upfit solutions. Whether transporting equipment, tools, supplies, or specialized machinery, the Transit Cutaway 350 HD is engineered to deliver dependable performance under heavy loads.

The dual rear wheel configuration significantly enhances stability, weight distribution, and load-carrying capability. Businesses operating with heavy payloads or larger body installations benefit from improved control and confidence on the road. The wider rear stance helps reduce sway while supporting enhanced traction and handling characteristics.

The 2027 Ford Transit Cutaway 350 HD platform is powered by a 3.5L V6 engine paired with a 10-speed automatic transmission, a combination designed to deliver both responsive torque and highway efficiency for commercial duty cycles. In similar configurations, output is typically tuned for strong mid-range performance, supporting stop-and-go urban delivery routes as well as sustained highway travel.

Inside the cab, the Transit Cutaway 350 HD XL trim focuses on durability and functionality rather than luxury, making it ideal for commercial use. The seating layout supports two occupants, with ergonomic controls designed for long-duty cycles and frequent stop-and-go driving. Ford's commercial cab design emphasizes visibility, ease of entry and exit, and straightforward instrumentation, all of which are critical for fleet drivers who spend extended hours on the road.

A Transit Cutaway is designed to serve as the starting point for a wide range of vocational applications, and the 2027 Ford Transit Cutaway 350 HD XL takes that mission seriously. The 138-inch wheelbase offers a balanced footprint that can support many upfit configurations while remaining manageable in everyday driving and jobsite use. With its 9,950 GVWR rating, this model is engineered to handle demanding commercial workloads, giving businesses the confidence to build out a vehicle that fits their exact operational needs.

One of the standout features of the 2027 Ford Transit Cutaway 350 HD XL AWD is its Intelligent All-Wheel Drive system. Designed to automatically adjust power distribution between the front and rear wheels, AWD helps improve traction in challenging weather and road conditions. Businesses operating in regions with rain, snow, dirt roads, or varying terrain can benefit from enhanced control and confidence behind the wheel.

Inside the 2027 Ford Transit Cutaway 350 HD XL trim, the focus is on practicality and durability. The layout is straightforward, with easy-to-clean materials and controls designed for repetitive commercial use. Modern connectivity features such as smartphone integration, Bluetooth capability, and available driver-assist technologies improve usability without distracting from the vehicle's core vocational purpose.

As a cutaway model, the 2027 Ford Transit Cutaway 350 HD XL is specifically built to serve as a foundation for custom commercial bodies. The exposed rear frame allows upfit manufacturers to install cargo boxes, service compartments, ambulance modules, or passenger shuttle bodies with ease. Ford's engineering focus on structural rigidity ensures that the chassis remains stable even under heavy loads and long-term commercial use.

The 2027 Ford Transit Cutaway 350 HD XL AWD is engineered for commercial operators who need maximum stability, traction, and upfit flexibility in a heavy-duty chassis cab platform. Built on Ford's proven Transit Cutaway architecture, this configuration combines dual rear wheels, all-wheel drive capability, and an 11,000-pound GVWR rating to support demanding vocational applications such as shuttle bodies, box trucks, utility service builds, and specialized fleet conversions.

The 156-inch wheelbase offers a balance between maneuverability and cargo capacity, making it a popular choice for mid-to-large vocational builds. This length supports a wide range of aftermarket and OEM upfits while maintaining manageable turning dynamics in urban environments. Whether configured as a shuttle bus, mobile workshop, delivery box, or service body, the extended wheelbase contributes to improved ride stability, particularly when the vehicle is fully loaded or operating in stop-and-go fleet conditions.

The 2027 Ford Transit Cutaway 350 HD is equipped with Ford's 3.5L PFDi V6 engine paired with a 10-speed automatic transmission. In this setup, output is engineered for consistent low-end torque delivery and sustained performance under load, making it suitable for stop-and-go commercial duty cycles and long highway routes alike.

With a 9,950-pound Gross Vehicle Weight Rating, the 2027 Ford Transit Cutaway 350 HD XL sits just under the 10,000-pound threshold commonly referenced in commercial regulations and fleet planning. That rating supports a strong payload capacity while leaving flexibility for body installation, equipment, and cargo systems without quickly exceeding limits.

At the core of the 2027 Ford Transit Cutaway 350 HD XL is a reinforced chassis engineered for commercial durability. The 9,950-pound GVWR rating places it in a sweet spot for operators who need substantial payload capacity without stepping into higher regulatory thresholds in many use cases. The DRW configuration improves rear-end stability, especially when the vehicle is fully upfitted and loaded, helping distribute weight more effectively across the rear axle.

The cutaway chassis design eliminates the rear cargo body, allowing upfitters to install custom-built solutions tailored to business needs. This flexibility is one of the strongest advantages of the 2027 Ford Transit Cutaway 350 HD lineup. The 156-inch wheelbase supports a wide range of body lengths and configurations, from compact utility boxes to extended shuttle bodies.

The 2027 Ford Transit Cutaway 350 HD XL with the 178-inch wheelbase is a key feature for operators who require expanded body configurations. This longer platform supports a wide range of upfit applications including larger cargo boxes, mobile workshops, food service builds, and shuttle-style passenger conversions. The extended wheelbase improves weight distribution across the chassis, reducing stress concentration on the rear axle assembly.

The 2027 Ford Transit Cutaway 350 HD platform is prized for its versatility for upfitting. The frame design allows for straightforward integration with aftermarket manufacturers, making it easier for businesses to configure the vehicle for specific operational needs. Whether the goal is passenger transport, mobile workspace solutions, or cargo delivery, this configuration offers a highly adaptable foundation.

At the core of this configuration is its 11,000-pound Gross Vehicle Weight Rating, which places it firmly in the heavy-duty segment of the 2027 Ford Transit Cutaway 350 HD lineup. This higher GVWR allows operators to carry more demanding upfit bodies and payloads without compromising structural integrity or performance margins.

The 2027 Ford Transit Cutaway 350 HD XL AWD stands out as a highly capable commercial platform designed for serious upfitting and fleet durability. With its reinforced chassis, advanced traction capability, and long-wheelbase flexibility, it delivers a dependable foundation for businesses that need consistent performance, maximum stability, and scalable build potential across a wide range of commercial applications.

With a Gross Vehicle Weight Rating of 9,950 pounds, the 2027 Ford Transit Cutaway 350 HD XL offers substantial carrying capacity while remaining practical for numerous commercial applications. The robust chassis is designed to support a variety of upfit solutions without compromising performance or reliability. Businesses involved in logistics, construction, maintenance services, transportation, and mobile operations can benefit from the vehicle's ability to accommodate demanding workloads while maintaining operational efficiency.

The 2027 Ford Transit Cutaway 350 HD incorporates technology designed to support productivity, connectivity, and fleet management. Modern infotainment systems, available connectivity solutions, and driver-assistance technologies help improve operational efficiency while enhancing the overall ownership experience. Fleet managers can benefit from technologies that support vehicle monitoring, maintenance scheduling, and driver communication, helping businesses maximize uptime and improve operational performance.

The 2027 Ford Transit Cutaway 350 HD XL AWD is designed for businesses that require a durable, adaptable, and capable commercial vehicle platform. Combining Ford's Heavy-Duty Transit architecture with intelligent All-Wheel Drive capability, this cutaway model provides an outstanding foundation for a wide variety of vocational upfits.

Equipped with a dual rear wheel configuration, the 2027 Ford Transit Cutaway 350 HD is engineered to handle demanding workloads. The dual rear wheels provide enhanced load distribution, increased stability, and improved confidence when transporting heavy equipment, tools, cargo, or specialized upfit bodies.